Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

daedalus

The "New" TTM Squeeze

Recommended Posts

Anyone got ideas on the new "filter"? I thought we could put our collective brainpower to work and might be able to come up with something.

 

At first I thought it was Heiken Ashi Based (his previous video used the filter as a paintbar) but I was unable to replicate it... now i'm leaning towards it being momentum based... ie if the momentum is decreasing for a set period of time or increasing for a set period of time it goes to gray to avoid catching tops or bottoms?

 

http://www.tradethemarkets.com/public/3444.cfm

 

Cheers!

Share this post


Link to post
Share on other sites

The new TTM Squeeze uses up to five anchor charts to filter the firing of the squeeze. It combines the TTM Squeeze TTM Squeeze Indicator, with the TTM Trend TTM Trend Indicator.

The TTM Trend is modified by using up to five anchor charts. For example if you are looking at the "New TTM Squeeze" on a five minute chart, your TTM Trend may have daily, 240 minute, 120 minute, and 60 minute anchor charts. If all of these charts are in alignment, that is blue bars for uptrend, red bars for down trend, you take the squeeze.

Here is a sample of the TTM Trend inputs:

 

Name Value

Tags "XMin/Daily/Weekly/Monthly"

Tag1 "Daily"

Tag2 "240min"

Tag3 "120min"

Tag4 "60min"

Tag5 ""

UpColor blue

DnColor red

NeutralColor lightgray

CompBars 6

 

In conclusion take the squeeze only when it is in the direction of the above TTM Trend. Long squeeze only with blue bars, short squeeze only with red bars, stay out on light gray bars.

 

Hope it helps.

Share this post


Link to post
Share on other sites

Most of their other indicators have simply been 'borrowed' (the less charitable would say stolen) from the public domain. You might have a search of the TS forums and other places that post indicators and see if you can spot the 'inspiration' for this particular study.

Share this post


Link to post
Share on other sites
Hello,

Do you know if a ninja trader's version exists ?

I want to make a MA with the TTM trend but i didn't find the ninja version of TTT trend.

Thanks

 

 

 

Share this post


Link to post
Share on other sites

Anchor and Sub Anchor Charts for Filtering Trades

 

It almost looks like its just an RSI filter... or at least it could be used as a proxy to what was posted above. Thanks for that info on it. It sounds like from what carter explained in this latest video you're right on. To code that you have to set up your chart with multiple data feeds correct?

 

Well aware of TTM's "Borrowing" (aka blatantly stealing) of the _BB Squeeze indicator from the TS forums... I don't use the indicator or plan on it but I just always get intrigued by trying to reverse engineer concepts that marketers like TTM try and keep secret.

Share this post


Link to post
Share on other sites

Yes, it's basically a TTM squeeze in it's original form (TTM Squeeze Indicator), plus a TTM Trend Paint Bar indicator (TTM Trend Indicator), also known as a momentum paint bar indicator.

 

The squeeze is available in may forms aka PBF-Squeeze. The TTM Trend with multiple time frames I haven't seen outside of TradeTheMarkets. Basically you can set up multiple time frame charts using the TTM Trend (pr BR_PaintBars) in a window by using separate charts for the 240, 120, 60 min etc. When all of these time frames are in confluence, one takes the squeeze.

 

The utility of "The New TTM Squeeze" is that it takes the trend indicator across multiple time frames and comes up with color bars in one window. For example if the paint bars in all of the selected time frames are blue (bullish) then one takes long squeezes and ignores shorts. I the paint bars in all of the time frames are red, then one takes only short squeezes, and passes on long squeezes. Gray bars are neutral, meaning that the paint bars on all time frames are not in confluence.

 

I can achieve what the afore mentioned paragraph states by setting up multiple charts with the TTM Trend. I would then have to look at bar colors on up to five charts to search for confluence. "The New TTM Squeeze" is programmed to do this task in one window.

 

Hope this helps, if not let me know.

 

Bruce

Share this post


Link to post
Share on other sites

Thank you for the response, i will do like you said, the equivalent of the TTM Trend is the pr BR_PaintBars but it's ELD and i'm using ninja trader, do you if a NT's version exists ?

Thank

Share this post


Link to post
Share on other sites

Yes there is heiken ashi but it's not the same, maybe the calcul is the same but the paint bar is different, with the TTM Trend it's a chart bar but with the heiken it's modified candlestick, am i clear ?

Share this post


Link to post
Share on other sites

Hi Everybody,

 

Can somebody write the new TTM squeeze and the new TTM trend for TS ?

It would be very nice.

 

Thank you in advance for your help.

 

Cheers,

Chloe

Share this post


Link to post
Share on other sites

It would be easy to code up except I don't get what kind of inputs will allow for different timeframe inputs?

 

If someone could explain how to handle using those as a variable it would be simple.

 

Just a case of if Timeframe1Bias = Up and Timeframe2Bias = up, etc. = Blue else gray.

 

Obviously not the exact syntax, but that idea would work. I just don't understand how to handle those inputs for the timeframes.

Share this post


Link to post
Share on other sites
It would be easy to code up except I don't get what kind of inputs will allow for different timeframe inputs?

If someone could explain how to handle using those as a variable it would be simple.

Just a case of if Timeframe1Bias = Up and Timeframe2Bias = up, etc. = Blue else gray.

Obviously not the exact syntax, but that idea would work. I just don't understand how to handle those inputs for the timeframes.

 

 

 

you can try this:

 

10853d1242929871-ade-all-data-everywhere-easylanguage-ade.jpg

 

 

ADE - All Data Everywhere

http://www.traderslaboratory.com/forums/f46/ade-all-data-everywhere-easylanguage-5934.html

Share this post


Link to post
Share on other sites

Carter hosting a webinar tonight Tues. July 21/09 detailing this indicator. FWIW, there is a paintbar study called 'TTM Trend Anchor' and another called 'TTM Squeeze Anchor' - essentially the same principle (cross referencing multi time frames). He just gets to bill ya' twice :deal:

Will post link to webinar recording when it becomes available.

Share this post


Link to post
Share on other sites

Hi Everybody,

 

I have the TTM trend and the TTM squeeze. The Anchor version seems very interesting.

However, I am not good enough at programming. I really do not known how to use multi timeframes in an indicator.

Did somebody try to code the TTM trend Anchor and the TTM squeeze Anchor ?

 

Thank you very much in advance for your help.

 

Best regards,

 

Chloe

Share this post


Link to post
Share on other sites
Hi Everybody,

I have the TTM trend and the TTM squeeze. The Anchor version seems very interesting.

However, I am not good enough at programming. I really do not known how to use multi timeframes in an indicator.

Did somebody try to code the TTM trend Anchor and the TTM squeeze Anchor ?

Thank you very much in advance for your help.

Best regards,

Chloe

 

 

 

Have you done a search with the keyword "Anchor" ???

 

the search button is at the top right corner of this page.

Share this post


Link to post
Share on other sites

Tams, I have searched for these TTM anchors on this site to no avail. One of our resident coding geniuses will have to take a run at this.

Edited by Minetoo
wording

Share this post


Link to post
Share on other sites

This was recently posted in the TS forum. It's a tad different from the TTM version, but could definitely be something to start with.

 

http://www.tradestation.com/Discussions/Topic.aspx?Topic_ID=92189

//============================================================//

//DTTpb_TZU_TTM_Anchor

 

 

Inputs: Sym(GetSymbolName),

ThisInterval(ADE.TickBarT(BarInterval)), {This setting defaults to the interval

of the chart the indicator is set into}

 

Interval1 (55),// number of ticks

Interval2 (89),// number of ticks

Interval3 (144),// number of ticks

Interval4 (233), // number of ticks

UpColor(Blue),

NeutColor(DarkGray),

DnColor(Red),

BarWidth(1),

CompBars(6),

DeriveBars(0),

UseFile(ADE.UseFile); // default UseFile is returned by ADE.UseFile function

 

Vars:

{ ThatInterval(ADE.TickBarT(200)), {Change this setting to the interval of the

chart with the embedded sender indicator}

}

Color1(0),

Color2(0),

Color3(0),

Color4(0),

colorAll(0),

Class("OHLCV"),

haClose1(0),

haClose2(0),

haClose3(0),

haClose4(0),

haOpen1(0),

haOpen2(0),

haOpen3(0),

haOpen4(0);

{************************************Data1***********************}

Value31 = ADE.TickBarT(Interval1);

if CurrentBar = 1 and UseFile then

Value11 = ADE.OpenMap(Class, Sym, Value31);

 

Value51 = Value41;

Value41 = TZS.SyncBarID(ThisInterval, Value31);

 

if Value41 <> Value51 then

begin

haClose1 = (ADF.GetData(Class, Sym, Value31, Value41, "Open", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "High", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "Low", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "Close", 0) )/4;

haOpen1 = ADF.GetData(Class, Sym, Value31, Value41, "Open", 0) ;

 

end;

if CurrentBar > 1 then begin

haClose1 = (ADF.GetData(Class, Sym, Value31, Value41, "Open", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "High", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "Low", 0)

+ADF.GetData(Class, Sym, Value31, Value41, "Close", 0) )/4;

haOpen1 = (haOpen1[1] + haClose1[1])/2 ;

 

if haClose1 > haOpen1 then Color1 =1 else Color1 =-1 ;

for value1 = 1 to CompBars

begin

if haOpen1 <= MaxList(haOpen1[value1],haClose1[value1]) and

haOpen1 >= MinList(haOpen1[value1],haClose1[value1]) and

haClose1 <= MaxList(haOpen1[value1],haClose1[value1]) and

haClose1 >= MinList(haOpen1[value1],haClose1[value1]) then

Color1 = Color1[value1];

end;end;

 

{************************************Data2*********************** }

Value32 = ADE.TickBarT(Interval2);

if CurrentBar = 1 and UseFile then

Value12 = ADE.OpenMap(Class, Sym, Value32);

 

Value52 = Value42;

Value42 = TZS.SyncBarID(ThisInterval, Value32);

 

if Value42 <> Value52 then

begin

haClose2 = (ADF.GetData(Class, Sym, Value32, Value42, "Open", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "High", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "Low", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "Close", 0) )/4;

haOpen2 = ADF.GetData(Class, Sym, Value32, Value42, "Open", 0) ;

 

end;

if CurrentBar > 1 then begin

haClose2 = (ADF.GetData(Class, Sym, Value32, Value42, "Open", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "High", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "Low", 0)

+ADF.GetData(Class, Sym, Value32, Value42, "Close", 0) )/4;

 

haOpen2 = (haOpen2[1] + haClose2[1])/2 ;

 

if haClose2 > haOpen2 then Color2 =1 else Color2 =-1 ;

for value1 = 1 to CompBars

begin

if haOpen1 <= MaxList(haOpen1[value1],haClose1[value1]) and

haOpen1 >= MinList(haOpen1[value1],haClose1[value1]) and

haClose1 <= MaxList(haOpen1[value1],haClose1[value1]) and

haClose1 >= MinList(haOpen1[value1],haClose1[value1]) then

Color2 = Color2[value1];

end;end;

 

{************************************Data3***********************}

Value33 = ADE.TickBarT(Interval3);

if CurrentBar = 1 and UseFile then

Value13 = ADE.OpenMap(Class, Sym, Value33);

 

Value53 = Value43;

Value43 = TZS.SyncBarID(ThisInterval, Value33);

 

if Value43 <> Value53 then

begin

haClose3 = (ADF.GetData(Class, Sym, Value33, Value43, "Open", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "High", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "Low", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "Close", 0) )/4;

haOpen3 = ADF.GetData(Class, Sym, Value33, Value42, "Open", 0) ;

 

end;

if CurrentBar > 1 then begin

haClose3 = (ADF.GetData(Class, Sym, Value33, Value43, "Open", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "High", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "Low", 0)

+ADF.GetData(Class, Sym, Value33, Value43, "Close", 0) )/4;

 

haOpen3 = (haOpen3[1] + haClose3[1])/2 ;

 

if haClose3 > haOpen3 then Color3 =1 else Color3 =-1 ;

for value1 = 1 to CompBars

begin

if haOpen3 <= MaxList(haOpen3[value1],haClose3[value1]) and

haOpen3 >= MinList(haOpen3[value1],haClose3[value1]) and

haClose3 <= MaxList(haOpen3[value1],haClose3[value1]) and

haClose3 >= MinList(haOpen3[value1],haClose3[value1]) then

Color3 = Color3[value1];

end;end;

{************************************Data4***********************}

Value34 = ADE.TickBarT(Interval4);

if CurrentBar = 1 and UseFile then

Value14 = ADE.OpenMap(Class, Sym, Value34);

 

Value54 = Value44;

Value44 = TZS.SyncBarID(ThisInterval, Value34);

 

if Value44 <> Value54 then

begin

haClose4 = (ADF.GetData(Class, Sym, Value34, Value44, "Open", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "High", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "Low", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "Close", 0) )/4;

haOpen4 = ADF.GetData(Class, Sym, Value32, Value42, "Open", 0) ;

 

end;

if CurrentBar > 1 then begin

haClose4 = (ADF.GetData(Class, Sym, Value34, Value44, "Open", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "High", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "Low", 0)

+ADF.GetData(Class, Sym, Value34, Value44, "Close", 0) )/4;

haOpen4 = (haOpen4[1] + haClose4[1])/2 ;

 

if haClose4 > haOpen4 then Color4 =1 else Color4 =-1 ;

for value1 = 1 to CompBars

begin

if haOpen4 <= MaxList(haOpen4[value1],haClose4[value1]) and

haOpen4 >= MinList(haOpen4[value1],haClose4[value1]) and

haClose4 <= MaxList(haOpen4[value1],haClose4[value1]) and

haClose4 >= MinList(haOpen4[value1],haClose4[value1]) then

Color4 = Color4[value1];

end;end;

 

{************************************Plot***********************}

 

if color1 + color2 + color3 + color4 = 4 then

colorAll = UpColor

else

// colorAll = NeutColor;

 

if color1 + color2 + color3 + color4 = -4 then

colorAll = DnColor

else

colorAll = NeutColor;

 

plotPB(High,Low,"heikin-ashi",colorAll);

SetPlotWidth(1,BarWidth);

SetPlotColor(1,colorAll);

Share this post


Link to post
Share on other sites

I was going to say, if one more person asks for the TTM Anchor, I am going to puke on my keyboard.

 

Now that the TTM Anchor code is posted...

I am bracing myself for the onslaught of questions on **WHY** it is NOT working in their computers.

 

 

 

To save you the trouble of asking...

the Anchor requires the ADE and TZU add-on

http://www.traderslaboratory.com/forums/f46/ade-all-data-everywhere-easylanguage-5934.html

Please make sure you read the 1st post thoroughly...

after you have understood the post and followed the instruction,

(especially the instruction of the last paragraph)

then move on to post #11,

read and install as directed.

 

If you still can't get it to work... have your credit card ready, call TTM.

 

Good luck.

Edited by Tams

Share this post


Link to post
Share on other sites

Hi Tams,

 

I am really sorry, I have installed the ADE and TZu add-ons. Then I have imported in Multicharts 5.0 the code provided by TraderJen. When I compile the code, I have an error message: ADF.GetData: Unknown Function ?

Would you be kind enough to help me please ?

 

Thanks in advance

Best regards,

Chloe

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Be careful who you blame.   I can tell you one thing for sure.   Effective traders don’t blame others when things start to go wrong.   You can hang onto your tendency to play the victim, or the martyr… but if you want to achieve in trading, you have to be prepared to take responsibility.   People assign reasons to outcomes, whether based on internal or external factors.   When traders face losses, it's common for them to blame bad luck, poor advice, or other external factors, rather than reflecting on their own personal attributes like arrogance, fear, or greed.   This is a challenging lesson to grasp in your trading journey, but one that holds immense value.   This is called attribution theory. Taking responsibility for your actions is the key to improving your trading skills. Pause and ask yourself - What role did I play in my financial decisions?   After all, you were the one who listened to that source, and decided to act on that trade based on the rumour. Attributing results solely to external circumstances is what is known as having an ‘external locus of control’.   It's a concept coined by psychologist Julian Rotter in 1954. A trader with an external locus of control might say, "I made a profit because the markets are currently favourable."   Instead, strive to develop an "internal locus of control" and take ownership of your actions.   Assume that all trading results are within your realm of responsibility and actively seek ways to improve your own behaviour.   This is the fastest route to enhancing your trading abilities. A trader with an internal locus of control might proudly state, "My equity curve is rising because I am a disciplined trader who faithfully follows my trading plan." Author: Louise Bedford Source: https://www.tradinggame.com.au/
    • SELF IMPROVEMENT.   The whole self-help industry began when Dale Carnegie published How to Win Friends and Influence People in 1936. Then came other classics like Think And Grow Rich by Napoleon Hill, Awaken the Giant Within by Tony Robbins toward the end of the century.   Today, teaching people how to improve themselves is a business. A pure ruthless business where some people sell utter bullshit.   There are broke Instagrammers and YouTubers with literally no solid background teaching men how to be attractive to women, how to begin a start-up, how to become successful — most of these guys speaking nothing more than hollow motivational words and cliche stuff. They waste your time. Some of these people who present themselves as hugely successful also give talks and write books.   There are so many books on financial advice, self-improvement, love, etc and some people actually try to read them. They are a waste of time, mostly.   When you start reading a dozen books on finance you realize that they all say the same stuff.   You are not going to live forever in the learning phase. Don't procrastinate by reading bull-shit or the same good knowledge in 10 books. What we ought to do is choose wisely.   Yes. A good book can change your life, given you do what it asks you to do.   All the books I have named up to now are worthy of reading. Tim Ferriss, Simon Sinek, Robert Greene — these guys are worthy of reading. These guys teach what others don't. Their books are unique and actually, come from relevant and successful people.   When Richard Branson writes a book about entrepreneurship, go read it. Every line in that book is said by one of the greatest entrepreneurs of our time.   When a Chinese millionaire( he claims to be) Youtuber who releases a video titled “Why reading books keeps you broke” and a year later another one “My recommendation of books for grand success” you should be wise to tell him to jump from Victoria Falls.   These self-improvement gurus sell you delusions.   They say they have those little tricks that only they know that if you use, everything in your life will be perfect. Those little tricks. We are just “making of a to-do-list before sleeping” away from becoming the next Bill Gates.   There are no little tricks.   There is no success-mantra.   Self-improvement is a trap for 99% of the people. You can't do that unless you are very, very strong.   If you are looking for easy ways, you will only keep wasting your time forgetting that your time on this planet is limited, as alive humans that is.   Also, I feel that people who claim to read like a book a day or promote it are idiots. You retain nothing. When you do read a good book, you read slow, sometimes a whole paragraph, again and again, dwelling on it, trying to internalize its knowledge. You try to understand. You think. It takes time.   It's better to read a good book 10 times than 1000 stupid ones.   So be choosy. Read from the guys who actually know something, not some wannabe ‘influencers’.   Edit: Think And Grow Rich was written as a result of a project assigned to Napoleon Hill by Andrew Carnegie(the 2nd richest man in recent history). He was asked to study the most successful people on the planet and document which characteristics made them great. He did extensive work in studying hundreds of the most successful people of that time. The result was that little book.   Nowadays some people just study Instagram algorithms and think of themselves as a Dale Carnegie or Anthony Robbins. By Nupur Nishant, Quora Profits from free accurate cryptos signals: https://www.predictmag.com/    
    • there is no avoiding loses to be honest, its just how the market is. you win some and hopefully more, but u do lose some. 
    • $CSCO Cisco Systems stock, nice top of range breakout, from Stocks to Watch at https://stockconsultant.com/?CSCOSEPN Septerna stock watch for a bottom breakout, good upside price gap
    • $CSCO Cisco Systems stock, nice top of range breakout, from Stocks to Watch at https://stockconsultant.com/?CSCOSEPN Septerna stock watch for a bottom breakout, good upside price gap
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.