Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

traderlu

Scalper Buys/Sell Replica

Recommended Posts

Hi All,

 

I have been an avid reader of this forum for a while. I just thought I would contribute to an internet that I have taken so much from...

 

Here is a replica of Scalper Buys and Sells. As far as I can tell, it matches up perfectly. If you would like to use it along with the Heiken-Ashi paintbars, I recommend you set the plot thickness to at least two more than the thickness of the Heiken-Ashi (In the attached picture, the Scalper Indicator is set to 3 and the Heiken-Ashi is set to 1). Also, please note that candlesticks are not supported.

 

Bugs/feedback are appreciated. I hope you all enjoy. Happy Trading,

 

Luis

 

p.s. For those of you who like to use candlesticks, I also have a ShowMe version, which places a dot on the highs/lows...Let me know if there is interest.

5aa70de89ab06_TTM_Scalperbare.thumb.jpg.c5fdcb72fcb09d3942faac0565451b67.jpg

TTM_SCALPER.ELD

5aa70de8a2c47_TTM_ScalperwithTrend.thumb.jpg.d639d5ffcce28d02a1bb136eaae51b5b.jpg

Share this post


Link to post
Share on other sites

You are all very welcome :) Glad I could help.

 

Glenbee, I will be posting the ShowMe in a separate thread shortly.

 

As far as how the indicator actually works, John's description of "three higher closes" is a bit misleading. I disregarded this criteria in the code. It is merely based on swing highs/lows. I'll give an example for a Scalper Sell:

 

1. You get a high that's at least as high or higher than the previous two bars. This bar is a potential paintbar.

2. The next bar makes a lower high; The low of this bar is the trigger.

3. From here, if we do not make a higher high and we get a close below the trigger, we paint the swing high bar. Concept is simple but was a bit tricky to program (for me, at least).

 

By the way, I got this description from the following video:

http://www.tradethemarkets.com/products/item7.cfm

 

Hope it helps!

Share this post


Link to post
Share on other sites

I've been searching for this indicator for literally a month now. There are some similar .eld's floating around, but they are not identical to the Scalper indicator. Yours is. Thanks so much!!!

Share this post


Link to post
Share on other sites
Could you please post the source code so I could port it to Amibroker?

Thanks!

 

sure thing, here goes:

{Scalper Buys and Sells		7/18/2007
Written by Luis Gomez 
inspired by John Carters "Mastering the Trade"
}

inputs:
buyColor(white),
sellColor(white),
width(3);
variables:
highBarsAgo(1),
possibleHighBarsAgo(1),
possibleHigh(-2),
hightoBeat(-1),
barsSincePaint(1),
lowBarsAgo(1),
possibleLowBarsAgo(1),
possibleLow(10000001),
lowtoBeat(10000000),
triggerPriceSell(-1),
triggerPriceBuy(1000000),
trend(1),
_UP(1),
_DOWN(-1),
_ON(1),
_OFF(-1);


//***************************************************
//****** Find and plot the highest swing high *******
//***************************************************

if trend = _UP then begin
if swingHighBar(1,H,2,barsSincePaint+2) > -1 then begin
	possibleHighBarsAgo = swingHighBar(1,H,2,barsSincePaint+2);
	possibleHigh = H[possibleHighBarsAgo];
end;

if possibleHigh >= hightoBeat then begin
	highBarsAgo = possibleHighBarsAgo;
	hightoBeat = possibleHigh;
	triggerPriceSell = L[HighBarsAgo - 1];
end;

if C < triggerPriceSell and 
	highest(high,highBarsAgo) < hightoBeat then begin
	plotpb[highBarsAgo](H[highBarsAgo],L[highBarsAgo],"",sellColor);
	alert("Scalper Sell");
	trend = _DOWN;
	barsSincePaint = highBarsAgo-1;
	hightoBeat = -1;
	lowtoBeat = 10000000;
	triggerPriceBuy = 10000000;
	triggerPriceSell = -1;
	highBarsAgo = 1;
	possibleHigh = -2;
end;

end;

//***************************************************
//****** Find and plot the lowest swing low *********
//***************************************************

if trend = _DOWN then begin
if swingLowBar(1,L,2,barsSincePaint+2) > -1 then begin
	possibleLowBarsAgo = swingLowBar(1,L,2,barsSincePaint+2);
	possibleLow = L[possibleLowBarsAgo];
end;

if possibleLow <= lowtoBeat then begin
	lowBarsAgo = possibleLowBarsAgo;
	lowtoBeat = possibleLow;
	triggerPriceBuy = H[LowBarsAgo - 1];
end;

if C > triggerPriceBuy and 
lowest(L,lowBarsAgo) > lowtoBeat then begin
	plotpb[lowBarsAgo](H[lowBarsAgo],L[lowBarsAgo],"",buyColor);
	alert("Scalper Buy");
	trend = _UP;
	barsSincePaint = lowBarsAgo-1;
	possibleLow = 10000001;
	lowtoBeat = 10000000;
	hightoBeat = -1;
	triggerPriceBuy = 10000000;
	triggerPriceSell = -1;
	lowBarsAgo = 1;
end;		

end;

barsSincePaint = barsSincePaint+1;
if trend = _UP then highBarsAgo = highBarsAgo + 1;
if trend = _DOWN then lowBarsAgo = lowBarsAgo + 1;
setPlotWidth(1,width);

 

All I ask is that my name stay in the code, please. Thanks, and enjoy!

Share this post


Link to post
Share on other sites

Hi Trader Lu, Thanks for the code it works in 2000i with some modification. However, the white paint bar completely blots out the colour of the underlying heiken ashi colour (unlike your attached thubnail). I have tried changing the thickness of both the HA and scalper b/s but still get just a white bar.... any suggestions ?

 

Thanks

Share this post


Link to post
Share on other sites
Hi Trader Lu, Thanks for the code it works in 2000i with some modification. However, the white paint bar completely blots out the colour of the underlying heiken ashi colour (unlike your attached thubnail). I have tried changing the thickness of both the HA and scalper b/s but still get just a white bar.... any suggestions ?

 

Thanks

 

Dovetree

 

Traderlu has also kindfully done it in a "show me" edition, shown here:

 

http://www.traderslaboratory.com/forums/f46/ttm-scalper-buys-sells-showme-edition-2127.html

 

Try transferring your code into a "Show me" indicator.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites
Hi Trader Lu, Thanks for the code it works in 2000i with some modification. However, the white paint bar completely blots out the colour of the underlying heiken ashi colour (unlike your attached thubnail). I have tried changing the thickness of both the HA and scalper b/s but still get just a white bar.... any suggestions ?

 

Thanks

 

Dovetree,

 

I have had that same problem. I think it has to do with the order in which you add the analysis techniques to your chart. Try adding the Heiken-Ashi first, then the Scalper, or vice-versa. I can't remember which was the right order. Just don't add them at the same time. This should do the trick. And don't forget the thickness! Hope this helps

 

-Luis

Share this post


Link to post
Share on other sites

Hope I'm not out of line here...but I use Sierra charts and the code that they use is C++. Does anyone know how difficult is it to convert code like Traderlu posted to C++. Does anyone have experience doing this or are there any examples of how to convert TS code to C++?:confused: Thx

Share this post


Link to post
Share on other sites
i do not know where to start from.

do u?

 

There's a link on page two of this thread. The TradeStation code is posted there. To start I would have a look at it to get the logic behind the paintbar study. If you don't know any EasyLanguage then I'd take that code to a forum where people know esignal language. I personally don't because I can't stand esignal.

Good luck with your quest. I hope you find answers.

Share this post


Link to post
Share on other sites

Traderlu,

 

Hi. Thanks for posting the TS code. I tried following the code, but I'm and esignal person so I don't get the small nuances of the code. I'm trying to convert this to esignal, but I keep getting confused by the rules. The video is also confusing as Carter keeps correcting himself and isn't clear.

 

1. You get a high that's at least as high or higher than the previous two bars. This bar is a potential paintbar.

Q- Is this 3 higher highs based on the close of each bar or just the highs of each bar?

 

2. The next bar makes a lower high; The low of this bar is the trigger.

Q - Same question as before, is this lower high based on the close of the trigger bar or the high of the trigger bar?

 

 

As far as how the indicator actually works, John's description of "three higher closes" is a bit misleading. I disregarded this criteria in the code. It is merely based on swing highs/lows. I'll give an example for a Scalper Sell:

 

1. You get a high that's at least as high or higher than the previous two bars. This bar is a potential paintbar.

2. The next bar makes a lower high; The low of this bar is the trigger.

3. From here, if we do not make a higher high and we get a close below the trigger, we paint the swing high bar. Concept is simple but was a bit tricky to program (for me, at least).

 

Thanks.

elliot

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Date: 29th March 2024. GBPUSD Analysis: The Pound Trades Higher But For How Long? The global Stocks Markets are closed due to Easter Friday (Good Friday). The NASDAQ continued to follow the sideways trend while other indices again rose. The SNP500 reaches an all-time high, but the NASDAQ remains under pressure from Tesla, Meta and Apple. The Euro continues to trade lower against all major currencies including the US Dollar, Euro and Japanese Yen. The British Pound is the best performing currency during this morning’s Asian session. However, investors are largely fixing their attention on this afternoon’s Core PCE Price Index. GBPUSD – The Pound Trades Higher but For How Long? The GBPUSD is slightly higher than the day’s open and is primary due to the Pound’s strong performance. At the moment, the British Pound is increasing in value against all major currencies. However, the US Dollar Index is also trading 0.10% higher and for this reason there is a slight conflict here. If investors wish to avoid this conflict, the EURUSD is a better option. This is because, the Euro depreciating against the whole currency market avoiding the “tug-of-war” scenario. The GBPUSD is trading slightly lower than the 2-month’s average price and is trading at 49.10 on the RSI. For this reason, the price of the exchange is at a “neutral” level and is signalling neither a buy nor a sell. The day’s price action and future signals are possibly likely to be triggered by this afternoon’s Core PCE Price Index. Analysts expect the Core PCE Price Index to read 0.3% which is slightly lower than the previous month but will result in the annual figure remaining at 2.85%. The PCE rate is different to the inflation rate and the Fed aims for a rate between 1.5% to 2.00%. Therefore, even if the annual rate remains at 2.85%, as analysts expect, it would be too high for the Fed. If the rate increases, even if only slightly, the US Dollar can again renew bullish momentum and the stock market can come under pressure. This includes the SNP500. Investors are focused on the publication of data on the UK’s gross domestic product (GDP) for the last quarter of 2023: the quarterly figures decreased by 0.3%, and 0.2% over the past 12-months. This confirms the state of a shallow recession and the need for stimulation. The data, combined with a cooling labor market and a steady decline in inflation, increase the likelihood that the Bank of England will soon begin interest rate cuts. In the latest meeting the Bank of England representatives did not see any members vote for a hike. USA500 – The SNP500 Rises to New Highs, But Cannot Hold Onto Gains! The price of the SNP500 rises to an all-time high, before correcting 0.33% and ending the day slightly lower than the open price. Nonetheless, the index performs better than the NASDAQ which came under pressure from Tesla, Meta and Apple which hold a higher weight compared to the SNP500. For the SNP500, these 3 stocks hold a weight of 9.25%, whereas the 3 stocks make up 14.63% of the NASDAQ. The SNP500 is also supported by ExxonMobil’s gains due to higher energy prices. The market will remain closed on Friday due to Easter. However, the market will reopen on Monday for the US and investors can expect high volatility. Investors will also need to take into consideration how the PCE Price Index and the changed value of the US Dollar is likely to affect the stock market next week. Always trade with strict risk management. Your capital is the single most important aspect of your trading business. Please note that times displayed based on local time zone and are from time of writing this report. Click HERE to access the full HFM Economic calendar. Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding on how markets work. Click HERE to register for FREE! Click HERE to READ more Market news. Michalis Efthymiou Market Analyst HFMarkets Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in FX and CFDs products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • MT4 is good and will be good until their parent company keep updating the software, later mt4 users will have to switch to mt5.
    • $SOUN SoundHound AI stock at 5.91 support area , see https://stockconsultant.com/?SOUN
    • $ELEV Elevation Oncology stock bull flag breakout watch , see https://stockconsultant.com/?ELEV
    • $AVDX AvidXchange stock narrow range breakout watch above 13.32 , see https://stockconsultant.com/?AVDX
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.