Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

UrmaBlume

Trade Intensity

Recommended Posts

As an aside some while back I wrote code to measure trade intensity. The (pretty simple) routine to do this could easily be used to re-aggregate large orders onto the time and sales. I don't really know Ninja that well, most of the aggro is finding out the mechanism to achieve something. How to display data on TS is precisely that sort of aggro. Too busy to take a look at that now but might if there is sufficient interest.

Share this post


Link to post
Share on other sites

Blowfish,

 

If you could get a trade intensity indicator and a rebundling indicator programmed for Ninja, I think you would be wildly popular (if they were any good of course ;) )! Maybe some members with a c# knowhow could get together to help you out on the project...

Share this post


Link to post
Share on other sites
Blowfish,

 

If you could get a trade intensity indicator and a rebundling indicator programmed for Ninja, I think you would be wildly popular (if they were any good of course ;) )! Maybe some members with a c# knowhow could get together to help you out on the project...

 

I have prototyped bundling trades and to be honest I don't think it's that useful. The problem is one has to make a lot of assumptions that are often incorrect. Just because two trades occur at the same time doesn't mean it was the same trader who made them. That sort of thing. I'm curious to know how others have handled this. The programming is not hard but it seems we don't have enough information to work with.

Share this post


Link to post
Share on other sites

I don't know cunparis. I have seen applications which do this in the past, but changes may now make this very difficult. I think it has just got to be an educated guess based on micro timestamp readings right? So if you have a really good data feed, the guess is more likely to be correct or closer to being correct.

Share this post


Link to post
Share on other sites

You will have to make assumptions that's true enough. If you get 300 1 lot trades all at exactly the same time (as reported by the API) it seems a reasonable to re bundle them. (with zen/ninjs I was surprised to find this happen quite a lot) .

 

Actually you could argue we are not really assuming anything....it is just easier to digest this on the tape as 300@xxx. Actually it is pretty much impossible to digest it all unless you do aggregate it. Essentially since the changes at CME it is impossible to read the tape (time and sales) without as prints (on some instruments) will scroll faster than the eye can see (let alone the brain process.

 

Negotiator, exactly you have no other real possibility other than setting a 'delta time' threshold. I'm not really inclined to program it at the moment (I do have urges to program now and then!). It really is pretty trivial though (not quite so sure about the displaying things in a scrolling grid). Having said that Ninjas sample code for OnMarketData displayed on a grid I think.

Share this post


Link to post
Share on other sites
All these indicator doesn't well on 100 tick charts?

 

 

Bomberone1,

 

The indicaors in our Indicator Pack are designed to work with volume charts as described in a TL Post Here or by downloading the Indicator Pack Manual HERE.

 

The Velocity/Intensity indicator works best on volume bars that are around .0004 of the average daily volume of the target instrument. For ES we find good results using 1,000 bar chart.

 

Today's session high (so far) was posted at 1008 PST in ES @ 1355.50. The HUGE spike in velocity shown in the chart below and the negative divergence between price and indicator V94 led to a 15 point drop in ES.

 

The chart below shows the session high today and how it was well indicated by these indicators. Some of the indicators in the pack indicate continuation and some such as shown in this chart indicate reversal.

 

TPS00005.jpg

Edited by UrmaBlume

Share this post


Link to post
Share on other sites

jojojo, if your hat is off in sarcastic appreciation, stop reading unless you're interested in an alternative pov.

 

UrmaBlume is in my top ten all time best of multiple objective measures. He publishes original research extending what already exists. He's disclosed what has existed but has not been previously disclosed. He walks the path he talks. He is a Saint by comparision to the claims of others I've observed.

 

Oh - Now the cat is out - clever marketing , chapeau

Share this post


Link to post
Share on other sites
We developed this indicator and all of our traders use it every day, in fact we have 2 different versions of it and they use both.

 

The HUGE CAVEAT with this indicator is that it can give the signal of a reversal when it is really a signal of continuation.

 

The good news is that with the proper filters based on order flow and the balance of trade it becomes easy to tell which is which. Without such filters or other corroboration its use can be very problematic.

 

cheers

 

UB

First off thanks UB for the thread! I spent the time to code up what I believe to be a crude NT version. I can now say with the utmost confidence that when I see intensity accelerate and then decelerate the market will either reverse or continue! :-)

 

Any chance you'd toss us a bone or pointer re order flow and/or balance of trade filtering?

NQ_9_4_2012-c.thumb.png.90aaf92b21262a2141a00266bde86442.png

NQ_9_4_2012-ru.thumb.png.92cf774b84479a3812a0f7f7cfc638ff.png

NQ_9_4_2012-rd.thumb.png.34d473975a760a1ecb8f3bcc2327d377.png

Share this post


Link to post
Share on other sites
First off thanks UB for the thread! I spent the time to code up what I believe to be a crude NT version. I can now say with the utmost confidence that when I see intensity accelerate and then decelerate the market will either reverse or continue! :-)

 

Any chance you'd toss us a bone or pointer re order flow and/or balance of trade filtering?

 

AZMike,

 

Thanks for the kind words.

 

As to our work with order flow and the balance of trade, there is more coming. By the end of next month TradePoint Software will bring out new software that will include an updated version of our Indicator Pack and an Update to the HUD. This will include more information about how to use Intensity to spot runs on stops and buy/sell programs.

 

To demo the efficacy of this software we will start a free room whose main purpose will be to demo and support the software.

 

To demo the software we will show real-time, real-money trade by bots who use inputs from the indicators in the indicator pack as their main source of trade decision support information.

 

To start, I will run the room and be open to questions about the software and trading in general. Participants will be encouraged to join the discussion and be given access to either phone in, Skype in or VOIP in. From those participants I will be looking to hire someone to take over the room to allow me more time for my work with the development of automated systems.

 

Besides offering a demonstration and support for my software, my goal with this room is to provide more useful trading support and information for free to traders of any level than is provided by any of the paid rooms.

 

As always I am open to any questions or comments by anyone. Contact info including phone is on our site.

 

cheers

 

UrmaBlume

Edited by UrmaBlume

Share this post


Link to post
Share on other sites

I just read this entire thread and saw I had posted in it a few years ago.

 

I tried to make something like this in SierraChart but it seems SC is limited by its smallest unit of time being 1 second. So with tick or volume charts, I can check to see if the time it took to create the bar was less than one second, which is basically 0 seconds, because SC cannot work with values less than 1 second but faster than zero seconds.

 

So I was able to using a tick chart of any size and measure the time between bars. Naturally the smaller size tick charts, the more accurate this would be. However, since it is limited to 1 second at the smallest, using too small of a tick chart size results in too many signals, and using too big of a tick chart size results in too few signals.

 

ES 500 tick chart:

http://www.sierrachart.com/Download.php?Folder=SupportBoard&download=185

 

ES 2000 volume:

http://www.sierrachart.com/Download.php?Folder=SupportBoard&download=186

 

ES 250 tick chart:

http://www.sierrachart.com/Download.php?Folder=SupportBoard&download=187

 

You can see there are many false signals on that last one.

 

I'm sure this isn't really close to UrmaBlume's but I also don't think you can get any closer with SC since 1 second is as fast as they can get.

Edited by metalhead

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Date: 25th April 2024. Investors Monitor a Potential Japanese Intervention, and upcoming Tech Earnings. Meta stocks top earnings expectations, but revenue guidance for the next 6 months triggers significant selloff. Meta stocks decline 15.00% and the Magnificent Seven also trade lower. Japanese Authorities are on watch and most market experts predict the Japanese Federal Government will intervene once again. The Japanese Yen is the day’s worst performing currency while the Australian Dollar continues to top the charts. The US Dollar trades 0.10% lower, but this afternoon’s performance is likely to be dependent on the US GDP. USA100 – Meta Stocks Fall 15% On the Next 6-Months Guidance The NASDAQ has declined 1.51% over the past 24 hours, unable to maintain momentum from Monday and Tuesday. Technical analysts advise the decline is partially simply a break in the bullish momentum and the asset continues to follow a bullish correction pattern. However, if the decline continues throughout the day, the retracement scenario becomes a lesser possibility. In terms of indications and technical analysis, most oscillators, and momentum-based signals point to a downward price movement. The USA100 trades below the 75-Bar EMA, below the VWAP and the RSI hovers above 40.00. All these factors point towards a bearish trend. The bearish signals are also likely to strengthen if the price declines below $17,295.11. The stock which is experiencing considerably large volatility is Meta which has fallen more than 15.00%. The past quarter’s earnings beat expectations and according to economists, remain stable and strong. Earnings Per Share beat expectations by 8.10% and revenue was as expected. However, company expenses significantly rose in the past quarter and the guidance for the second half of the year is lower than previous expectations. These two factors have caused investors to consider selling their shares and cashing in their profits. Meta’s decline is one of the main causes for the USA100’s bearish trend. CFRA Senior Analyst, Angelo Zino, advises the selloff may be a slight over reaction based on earnings data. If Meta stocks rise again, investors can start to evaluate a possible upward correction. However, a concern for investors is that more and more companies are indicating caution for the second half of the year. The price movements will largely now depend on Microsoft and Alphabet earnings tonight after market close. Microsoft is the most influential stock for the NASDAQ and Alphabet is the third. The two make up 14.25% of the overall index. If the two companies also witness their stocks decline after the earnings reports, the USA100 may struggle to gain upward momentum. EURJPY – Will Japan Intervene Again? In the currency market, the Japanese Yen remains within the spotlight as investors believe the Japanese Federal Government is likely to again intervene. The Federal Government has previously intervened in the past 12 months which caused a sharp rise in the Yen before again declining. The government opted for this option in an attempt to hinder a further decline. Volatility within the Japanese Yen will also depend on today’s US GDP reading and tomorrow’s Core PCE Price Index. However, investors will more importantly pay close attention to the Bank of Japan’s monetary policy. Investors will be keen to see if the central bank believes it is appropriate to again hike in 2024 as well as comment regarding inflation and the economy. In terms of technical analysis, breakout levels can be considered as areas where the exchange rate may retrace or correct. Breakout levels can be seen at 166.656 and 166.333. However, the only indicators pointing to a decline are the RSI and similar oscillators which advise the price is at risk of being “overbought”. Always trade with strict risk management. Your capital is the single most important aspect of your trading business. Please note that times displayed based on local time zone and are from time of writing this report. Click HERE to access the full HFM Economic calendar. Want to learn to trade and analyse the markets? Join our webinars and get analysis and trading ideas combined with better understanding on how markets work. Click HERE to register for FREE! Click HERE to READ more Market news. Michalis Efthymiou Market Analyst HFMarkets Disclaimer: This material is provided as a general marketing communication for information purposes only and does not constitute an independent investment research. Nothing in this communication contains, or should be considered as containing, an investment advice or an investment recommendation or a solicitation for the purpose of buying or selling of any financial instrument. All information provided is gathered from reputable sources and any information containing an indication of past performance is not a guarantee or reliable indicator of future performance. Users acknowledge that any investment in FX and CFDs products is characterized by a certain degree of uncertainty and that any investment of this nature involves a high level of risk for which the users are solely responsible and liable. We assume no liability for any loss arising from any investment made based on the information provided in this communication. This communication must not be reproduced or further distributed without our prior written permission.
    • $ALVR AlloVir stock bottom breakout watch, huge upside gap, https://stockconsultant.com/?ALVR
    • $DIS Disney stock attempting to move higher off the 112.79 triple support area, https://stockconsultant.com/?DIS
    • $ADCT Adc Therapeutics stock flat top breakout watch above 5.31, https://stockconsultant.com/?ADCT
    • $CXAI CXApp stock local support and resistance areas at 2.78, 3.52 and 5.19, https://stockconsultant.com/?CXAI
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.