Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Blu-Ray

Various Indicators (Squeeze,2FastMa's,etc)

Recommended Posts

Here is a bundle of indicators for you, the development of them were requested as per this thread.

 

http://www.traderslaboratory.com/forums/f18/paintbarfactory-com-not-spam-a-question-3168.html

 

I have been hesitant to post these as some of them are NOT the same as per the above thread. But due to several requests recently I'm posting them anyway.

 

The attached indicators are:

 

BR_CCi : Which is basically a smoothed CCi.

BR_RSI : Which again is a smoothed RSi.

BR_Momentum : Again a smoothed Momentum ( Can't believe people would actually charge for these :roll eyes: )

BR_PaintBars : MA based trend bars.

BR_2FastMa's : Self explanatory.

BR_Squeeze : Partly based on the original squeeze ( as we all know it ), but the histogram is defined to show clearer divergences. Also includes CounterTrend and an alternative midline.

BR_HeatMeter : Can you take the heat ! ( well actually it's just a 50 period CCi :\)

 

For more information on the indicators, please go to the above thread for details.

 

See Attached Charts to show each indicator.

 

attachment.php?attachmentid=5838&stc=1&d=1207221850

 

attachment.php?attachmentid=5839&stc=1&d=1207221850

 

attachment.php?attachmentid=5840&stc=1&d=1207221850

 

Can I just stress that some of these are NOT THE SAME, so take them with a pinch of salt ;)

 

Cheers

 

Blu-Ray

3_Smoothed.png.d348855de73ae8158b3a8ab2f7ac34e9.png

squeeze.thumb.png.ec94fcc5d24ae7fe6d71c9c6f0d3ff64.png

Heatmeter.thumb.png.44a99ce25924e8cef9812b50fd7c060a.png

BR_2FASTMA'S.ELD

BR_CCI.ELD

BR_HEATMETER.ELD

BR_MOMENTUM.ELD

BR_PAINTBARS.ELD

BR_RSI.ELD

BR_SQUEEZE.ELD

Share this post


Link to post
Share on other sites

Hi Blu-Ray, Thanks for these. I noticed that your squeeze seems to be a little different to the original. Specifically it seems to filter out some "false squeezes". I use Ts 2000i could you please post the code for this if possible.

thanks

Share this post


Link to post
Share on other sites
Hi Blu-Ray, Thanks for these. I noticed that your squeeze seems to be a little different to the original. Specifically it seems to filter out some "false squeezes". I use Ts 2000i could you please post the code for this if possible.

thanks

 

Yes no problems, but I'm away now for a week, so I'll sort it out when I get back, just send me a PM in a week's time to remind me on.

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites
Yes no problems, but I'm away now for a week, so I'll sort it out when I get back, just send me a PM in a week's time to remind me on.

 

Cheers

 

Blu-Ray

 

I have a problem with importing all these indicators in Multicharts. Program returns Error code 1. Would it be possible to post the code?

 

Sorry, its a problem with PL Editor. Everithing works fine on another computer except BR Squeeze, which even doesn't arrive in PL Editor for importing and compiling.

Edited by garp

Share this post


Link to post
Share on other sites

Here's the code :

 

Inputs: SqLength(20),

Length1(9),

Length2(13),

Length3(21),

CounterTrendMode(false),

ChangeMidLine(false),

nK(1.5),

nBB(2),

AlertLine( 1 );

 

 

vars:

CCiValue(0),DownCT(0),UpCT(0),SDev(0),ATR(0),LHMult(0),Denom(0),BBS_Ind(0);

 

if ChangeMidLine = false then begin

{MiddleLine - based on BB Squeeze}

 

if ( barnumber=1 ) then

Begin

If minmove <> 0 then

LHMult = pricescale/minmove;

end;

 

 

{-- Calculate BB Squeeze Indicator ----------------------}

ATR = AvgTrueRange(SqLength);

SDev = StandardDev(close, SqLength, 1);

 

Denom = (nK*ATR);

If Denom <> 0 then

BBS_Ind = (nBB * SDev) /Denom;

 

If BBS_Ind < Alertline then

SetPlotColor(1, Red)

else

SetPlotColor(1, Blue);

 

 

if BBS_Ind crosses below AlertLine then

SetPlotColor(1, green);

 

{-- Plot the Index & Alert Line -------------------------}

Plot1(0, "Squeeze");

end;

 

if ChangeMidLine = true then begin

{MiddleLine - based on a Hull Moving Average}

 

value1 = jthma(H/3+L/3+C/3,Length3);

 

 

if (Value1) > (Value1[1]) then

SetPlotColor(1, green);

if (Value1) < (Value1[1]) then

SetPlotColor(1, red);

 

Plot1(0, "Squeeze");

end;

 

 

{Histogram - based on two ema's of Hull MA's}

 

value3 = xaverage(jthma(close, length1),Length2) - xaverage( jthma(close, length2), length2+7 );

 

plot4(value3,"DiffHisto");

 

if value3 > 0 then

if value3 > value3[1] then

setplotcolor(4,green)

else

setplotcolor(4,darkgreen);

 

if value3 < 0 then

if value3 < value3[1] then setplotcolor(4,red)

else

setplotcolor(4,darkred);

 

 

 

{++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++}

 

 

 

{ Counter Trend Mode - Based on when cci(13) gets below 50 and stays dark red until going back above 100}

if CounterTrendMode = true then begin

 

CCiValue = CCi(13);

 

Condition1 = ccivalue[1] > 50;

Condition2 = CCivalue < 50;

Condition3 = CCivalue[1] < 100;

Condition4 = CCiValue > 100;

Condition5 = value3 > 0;

Condition6 = value3[1] > 0;

Condition7 = value3[2] > 0;

Condition8 = ccivalue < 100;

 

 

if Condition1 and Condition2 and Condition5 and condition6 and condition7 then begin

setplotcolor(4,DarkRed);

DownCT = 1;

end;

 

if DownCT = 1 and value3 < 0 then DownCT =0;

 

 

if DownCT = 1 and Condition8 and Condition5 then setplotcolor(4,darkred);

 

if DownCT = 1 and Condition3 and Condition4 then begin

setplotcolor(4,green);

DownCT = 0;

end;

 

Condition11 = ccivalue[1] < -50;

Condition12 = CCivalue > -50;

Condition13 = CCivalue[1] >- 100;

Condition14 = CCiValue < -100;

Condition15 = value3 < 0;

Condition16 = value3[1] < 0;

Condition17 = value3[2] < 0;

Condition18 = ccivalue >-100;

 

 

if Condition11 and Condition12 and Condition15 and condition16 and condition17 then begin

setplotcolor(4,DarkGreen);

UpCT = 1;

end;

 

if UpCT = 1 and value3 > 0 then UpCT =0;

 

 

if UpCT = 1 and Condition18 and Condition15 then setplotcolor(4,darkgreen);

 

if UpCT = 1 and Condition13 and Condition14 then begin

setplotcolor(4,Red);

UpCT = 0;

end;

 

 

end;

 

Cheers

 

Blu-Ray

Share this post


Link to post
Share on other sites

moneymarkets,

It appears that a .pla file is not accepted for uploading in this forum. Do you know that the squeeze indicator requires the jtHMA function to work? Could that be your problem?

 

Regards

Share this post


Link to post
Share on other sites

My Apologies, it requires the jtHMA function which I forgot to post the code, so here it is:

 

{jtHMA - Hull Moving Average Function}

{Author: Atavachron}

{May 2005}

 

Inputs: price(NumericSeries), length(NumericSimple);

Vars: halvedLength(0), sqrRootLength(0);

 

{

Original equation is:

---------------------

waverage(2*waverage(close,period/2)-waverage(close,period), SquareRoot(Period)

Implementation below is more efficient with lengthy Weighted Moving Averages.

In addition, the length needs to be converted to an integer value after it is halved and

its square root is obtained in order for this to work with Weighted Moving Averaging

}

 

if ((ceiling(length / 2) - (length / 2)) <= 0.5) then

halvedLength = ceiling(length / 2)

else

halvedLength = floor(length / 2);

 

if ((ceiling(SquareRoot(length)) - SquareRoot(length)) <= 0.5) then

sqrRootLength = ceiling(SquareRoot(length))

else

sqrRootLength = floor(SquareRoot(length));

 

Value1 = 2 * WAverage(price, halvedLength);

Value2 = WAverage(price, length);

Value3 = WAverage((Value1 - Value2), sqrRootLength);

 

jtHMA = Value3;

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

Here's a new one that's just been added:

 

BR_Trend_Bars

 

attachment.php?attachmentid=6070&stc=1&d=1208347186

 

and the code : ( You'll need the jtHMA function as posted above )

 

Inputs:

Price(Close),

Length1(13),

Length2(34),

Length3(89),

UpLevel(35),

MidLevel(0),

LwrLevel(-35);

 

 

 

Value1 = jthma(Price,Length1);

Value2 = jthma(Price,Length2);

Value3 = jthma(Price,Length3);

 

if Value1 > Value1[1] then Plot1(UpLevel,"UpLevel", Green) else Plot1(UpLevel,"UpLevel", Red);

 

if Value2 > Value2[1] then Plot2(MidLevel,"MidLevel",Green) else Plot2(MidLevel,"MidLevel",Red);

 

if Value3 > Value3[1] then Plot3(LwrLevel,"LwrLevel",Green) else Plot3(LwrLevel,"LwrLevel",Red);

 

Hope this helps

 

Blu-Ray

BR_TREND_BARS.ELD

br_trend_bars1.png.4ee8b77a88a7b020b162f5ce9931ffae.png

Share this post


Link to post
Share on other sites

Great work Blu-Ray !

Is it possible to convert these things to NinjaTrader - Indicators ?

Your last one - it shows different HMA - length on the bottom-line with these dots ?

Share this post


Link to post
Share on other sites
Great work Blu-Ray !

Is it possible to convert these things to NinjaTrader - Indicators ?

Your last one - it shows different HMA - length on the bottom-line with these dots ?

 

It should be possible to convert them to Ninjatrader, however I don't know how to use their coding language.

 

If I'm understanding your last question correctly, the three lines are all different lengths, top one being 13hma, middle 21hma and the bottom one a 89hma.

 

Hope this helps

 

Blu-Ray

Share this post


Link to post
Share on other sites

Blue Ray, thank you very much, the code of BR Squeeze successfuly compiled in Multicharts 2.1. Sorry for the late thanx, I was out for some days, but it's better later then never. ;)

Share this post


Link to post
Share on other sites

Blue Ray, those look great. Would you be able to code (for TS) the slower MA's (the two dotted ones)? It makes for a great study for a beginner like me (as well as learning how to code). Thanks!!

Share this post


Link to post
Share on other sites
Blue Ray, those look great. Would you be able to code (for TS) the slower MA's (the two dotted ones)? It makes for a great study for a beginner like me (as well as learning how to code). Thanks!!

 

 

Yes, No probs, here you go..........I've coded it up as per pic on website, but I've missed out the darkred section as that is when you the 2 MA's are within are certain distance ( and for that reason you need to select stocks,futures or forex ) ....... probably unnecessary as you can eyeball when they are very close.

 

attachment.php?attachmentid=6137&stc=1&d=1208768824

 

and the code :

 

Inputs:

Price(Close),

Length1(49),

Length2(89),

UpColor(Green),

DnColor(Red),

EarlyWarnColor(Yellow);

 

Vars:

FastEMA(0),SlowEMA(0);

 

 

FastEMA = xaverage(Price,Length1);

SlowEMA = xaverage(Price,Length2);

 

Plot1(FastEMA,"FastEMA");

Plot2(SlowEMA,"SlowEMA");

 

if FastEMA > SlowEMA then begin

setplotcolor(1,UpColor);

setplotcolor(2,UpColor);

end;

 

if FastEMA > SlowEMA and close < FastEMA then begin

setplotcolor(1, EarlyWarnColor);

setplotcolor(2, EarlyWarnColor);

end;

 

if FastEMA < SlowEMA then begin

setplotcolor(1,dnColor);

setplotcolor(2,dnColor);

end;

 

if FastEMA < SlowEMA and close > FastEMA then begin

setplotcolor(1, EarlyWarnColor);

setplotcolor(2, EarlyWarnColor);

end;

 

 

Hope this helps

 

Blu-Ray

BR_2EMA_COLOR.ELD

2EMAColor.png.4b3937fecf63e932dae15c41951c38e7.png

Share this post


Link to post
Share on other sites
Here it is for MC. Unzip before import.

 

There is any difference between the version for TS and the version for MC??, the Multicharts should import the ELD for TS without any problem..right?:)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.