Jump to content

Welcome to the new Traders Laboratory! Please bear with us as we finish the migration over the next few days. If you find any issues, want to leave feedback, get in touch with us, or offer suggestions please post to the Support forum here.

  • Welcome Guests

    Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at Traders Laboratory such as interacting with members, access to all forums, downloading attachments, and eligibility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE Traders Laboratory account here.

Recommended Posts

Hey folks! Happy new year!

 

Have a few quick technical questions ..

 

1. In the VSA analysis, when the literature talks about UP bar or a DOWN bar, what does that actually signify:

a. The open price > prev close?

b. the open price > close on the same day?

 

2. When the literature says, narrow spread, what does that refer to:

a. distance between Open and Close

b. distance between High and Low

 

3. I understand that when we talk about high volume it is very relative. But I assume there is probably a standard volume moving average above which the volume is termed as high volume. Any suggestions on what volume moving average to use and what percent violation over the moving average would you consider to call it High Volume.

 

4. When you say narrow spread, is it narrow with respect to the whole range (High - Low) of the bar OR is that just a relative to other bars?

 

Though I understood the vsa concepts generally, the above questions seem to plague me with few doubts. Thanks for your coaching ..

 

PI

Share this post


Link to post
Share on other sites

I am no guru, but I have studied VSA pretty closely for the past few months and I believe I can give you some answers. I'm sure others that are more practiced can correct me if I am wrong.

 

1. An UP bar is simply a bar where the close is higher than the close of a previous bar and a DOWN bar is simply the opposite. As far as "on the same day" a bar is just a bar whether its a 5 minute bar or a weekly bar. It is simply a comparison to the close of the bar prior to the one you are looking at.

 

2. In VSA "spread" refers to the high and low of the bar. You'll find that VSA basically ignores the open of the bar in all cases.

 

3. & 4. As you seem to realize the terms "high" or "low" volume and "high" or "low" spread are relative terms in VSA. Specific to your question about a bar being "narrow" this means relative to previous bars. Narrow on one chart might be 5 points/pips/cents and on another chart narrow might be 100 points/pips/cents. Also be aware that when you make these comparisons the most recent price action is more relevant. You might find that what was "narrow" 6 months ago on an instrument might be "wide" in more recent weeks because it has become less volatile.

 

As far as what to compare or how much to average that can vary quite a bit. I've seen everything from the average of the last 100 bars to 10 bars to any variation between and beyond. There are also various ways to average the spread and or volume. I'm sure you can find many methods people have shared on how they like to compare spread and volume but as far as I know there is no 1 "way" that works for everything. It really depends on the volatility of the instrument and your own psychology. While someone might use a 100 bar average and it works perfectly for them, it may seem too slow or frustrating for you.

 

Hope that was helpful.

Edited by NeoTrader

Share this post


Link to post
Share on other sites
Hi all,

My new to this forum and have been self studying vsa. I like to do my trading system based on vsa, but I having difficulty doing so. How can I codified the vsa? Thanks

 

lchunleo

To fully code VSA correctly actually requires 3 layers.

1. code that identifies the ‘big picture’ context, what stage the ‘campaign’ is in, etc

2. identifying the correct underlying context ... which is basically the setup created by the last n bars (~10 - 30 bars for this method). This setup will condition which micro volume and ‘spread’ patterns/triggers are valid as they occur.

3. then coding the micro volume and ‘spread’ patterns/triggers themselves.

 

Most VSA traders attempt to work all three using wetware instead of software.

A few do number 3 with software and attempt the other two with wetware.

Very few even attempt and even fewer succeed at coding 1 and/or 2 above.

 

Point is - and contrary to what the ‘voice of trading’ industry and the ‘best’ trading instructors are telling you - codewise, whether via wetware or software,

Successful triggers require correct setups

Successful setups require correct context.

(and btw this is true for almost all trading methods ... I may post more about this for noobs later...)

 

/

 

Most traders who study VSA attempt to learn (or code) it 3, then 2, then maybe 1. The best order to learn ‘it’ is 1,2, then 3. When 1 is mastered first then 2 and 3 fall into place. But when 3 is mastered first, 2 and 1 do not automatically fall into place

And when 2 is mastered first, the others do not automatically fall into place

Also, all (but a few lucky exceptions) who attempt to trade VSA and omit 1 above and work only 2 and 3 --- and weeks, months, or years later they wonder where they went wrong. ... and this is the way all the naysayers about this and other various methods are created.

(and btw this is also true for almost all trading methods ... I may post more about this for noobs later...)

 

Imo, any due diligence coding efforts with micro volume and ‘spread’ patterns/triggers would also require including additional ‘micro’ price/volume patterns not found in the strict VSA in the set of triggers coded. (see wyc koffy, her shey, etc. )

 

Over the years there has been free code uploaded that identify the micro volume and ‘spread’ patterns... maybe some of them are still up. I might still have some of that code. PM me if you would like me to look in my archives.

 

hth

 

zdo

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Topics

  • Posts

    • Can I ask what broker are you using for trading oil?
    • Hey, I am new to this. Anyone use software like this?? Is it legit?? 
    • Extend Trend Lines is a VTL Client-side indicator for elongating the trend lines on the chart to the last bar. Traders usually draw trend lines on the chart and use them as support resistance levels. When a trend line breakout happens, it is the beginning of a new trend. One issue with trend lines drawn manually on the chart is that they do not get elongated when new bars form on the chart. It should be manually adjusted with new bars.  Extend Trend Lines VTL Indicator takes care of this situation. It automatically adjusts all trend lines on the chart to the last bar. It monitors the trend lines on each new bar and adjust them.  This is useful when the trader opens the terminal on a new day and the old trend lines are short and need adjustments.   ExtendTrendLines.zip
    • Previous day high low is a Client Side VTL indicator that draws the last day’s high, low and today’s open on the chart. When day trading, the previous day’s high and low are important reference points or support resistance levels. In a bullish market price breaks above the previous day’s high early in the day and continue to trade above that level.  In bear markets, price break below the previous day’s low early in the day and continue to trade below that level.  Trading ranges form when price fails to break the previous day’s high or low successfully.  This info alone can improve your trading results as this give you a clear vision of what is likely to happen today. Breakout trading strategies work best when price is above or below yesterday’s range. Trend following strategies also work best in this situation.  When price is inside yesterday range, counter trend strategies work better. Oscillators like RSI and Stochastics work best in this situation.   Prev_Day_High_Low.zip
    • volatility.   STARC bands is used in two modes. First one is as a trend following indicator. For this enter 1.33 for parameter KATR. Now when price breaks out of the bands, there is a high probability that price move will continue in that direction. Open positions in the breakout direction.   To use STARC bands as an oversold overbought indicator, make parameter KATR 3. Now when the price reaches the bands, chances are that it is a short-term price extreme. Countertrend trades can be opened here.   Parameters: 1.       MA_Period – Moving Average Period 2.       ATR_Period – Average True Range Period 3.       KATR – ATR multiplier 4.       Shift – Number of bars to shift forward   STARC Bands.zip
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.